nicked-plated shell 0.039 inch pitch PA66 material crimp type DF19 wire to board connector

รายละเอียดสินค้า:

Place of Origin:	Dongguan, China(mainland)
ชื่อแบรนด์:	HRT
ได้รับการรับรอง:	ISO9001/ ISO14001/UL/RoHS/REACH
Model Number:	A1007H-NP

การชำระเงิน:

Minimum Order Quantity:	5000 pcs
ราคา:	USD0.001 to 0.5 per pcs
Packaging Details:	Bag with outside carton
Delivery Time:	5 to 8 working days after payment checked
Payment Terms:	TT, Western Union, PayPal, L/C
Supply Ability:	500 K pcs per month

ติดต่อตอนนี้

รายละเอียดสินค้า

Suitable terminals:	A1007T series	Suitable wafer:	A1017W series
Wire Insulation Diameter:	0.60mm Max.	Connector Type:	Socket
Flammability:	UL94V-0	Row:	single
แสงสูง:	Pcb To Wire Connectors , Board To Wire Connectors

1, The specification as below sheet

Basic size information
Color		White
Pitch		1.00mm
Material		PA9T
Mating lock		without
Wire Termination Method		Crimping
Circuits		8pins/14pins/20pins/30pins
Wire Insulation Diameter		0.60mm Max.
Wire range		AWG28# to 32#

Electrical properties
Current Rating		1A AC, DC
Voltage Rating		100V AC, DC
Contact Resistance		30mΩ Max
Insulation Resistance		500mΩ min
Withstanding Voltage		500V AC/minute

Mechanical properties
Temperature range		-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

nicked-plated shell 0.039 inch pitch PA66 material crimp type DF19 wire to board connector

Testing report

1. Scope

This specification covers the requirements for product performance of 1.00mm pitch wire to board

connectors series.

2. Construction,Dimensions,Material & Plating

See the attached drawings

3. Ratings & Applicable Wires

Item	Standard
Rated Voltage (Max.)	100V AC/DC		Insulation O.D. 0.60mm (Max.)
Rated Current (Max.) And Applicable Wires	AWG#28	1A AC/DC
	AWG#30	0.9A AC/DC
	AWG#32	0.8A AC/DC
Ambient Temperature Range	-25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description		Procedure	Requirement
4-1	Contact Resistance	Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)	30mΩ (Max.)
4-2	Insulation Resistance	Mate connectors, apply 200V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)	500MΩ (Min.)
4-3	Dielectric Withstanding Voltage	Mate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)	No Breakdown.
4-4	Contact Resistance on Crimped Portion	Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.	5mΩ (Max.)

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#28	1.0kgf (Min)
			AWG#30	0.8kgf (Min)
			AWG#32	0.5kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	0.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	0.50kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	0.30kgf (Min.)
5-6	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 60mΩ (Max.)
5-7	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 60mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-8	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description		Procedure	Requirement
6-1	Temperature Rise	Carrying rated current load.(Based upon UL 498)	30℃(Max.)
6-2	Heat Resistance	85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)	Appearance No Damage. Contact Resistance 60mΩ (Max.)
6-3	Cold Resistance	-25±3℃,96 hours (Based upon JIS C0020)	Appearance No Damage. Contact Resistance 60mΩ (Max.)
6-4	Humidity	Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)	Appearance No Damage. Contact Resistance 60mΩ (Max.) Insulation Resistance 10MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3
6-5	Temperature Cycling	5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025)	Appearance No Damage. Contact Resistance 60mΩ (Max.)
6-6	Salt Spray	Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7	SO2 Gas	24 hours exposure to 50±5ppm. SO2 gas at 40±2℃.
6-8	NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

6-9

Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes

6-10

Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

Circuits	At Initial
Circuits	Insertion (Max.)	Withdrawal (Min.)
08	1.6	0.20
14	2.8	0.35
20	4.0	0.50
30	6.0	0.75

3, FAQ about our company

1, Q: Do you have a catalogue? Can you send me the catalogue to have a check of all your products?
A: Yes, We have product catalogue. Please contact us on line or send an Email to send the catalogue.

2, Q: Do you have a price list? I need your price list of all your products.
A: We do not have a price list of all of our products. Because we have so many items, and it's impossible to mark all of their price on a list. And the price are always changing because of the producing cost. If you want to check any price of our products, please feel free to contact us. We will send offer to you soon!

3, Q: I can’t find the product on your catalogue, Can you make this product for me?
A: Our catalogue shows most of our products, but not all. So just let us know what product do you need, and how many do you want. If we do not have it, we can also design and make a new mould to produce it. For your reference, making a ordinary mould will take about 20-35 days.

4, Our Services

Customizable specification drawing and material is avaiable.More than 12 years experience in conenctor, wire housing, wafer, terminals, other metal parts, etc. Products samples is free, you just need pay for the freight. Besides, we have a strict quality control systerm, so we are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth,BYD, LuXshare,etc.

แท็ก:

ผู้ติดต่อ: Tienne Chen

โทร: +8613711905178